ค้นหา

Custom Search

วันศุกร์ที่ 30 มกราคม พ.ศ. 2558

How to: สมุดใส่นามบัตร

Materials need to be prepared
Cloth  table cloth shop bale sideband buckle woven label card core
(I use the 40-bit card 
)
About the size, because we could use the card cores are not the same, it will be a little out of the dimension
As long as we remember that, do edging styles, according to the length of each card plus 3cm core size on the line, and then hit the fillet
There are inner dimensions, the inner layer is a layer of fabric on both sides, two opposite inner folds, center spacing 5cm
(For example: Finished length is 23cm, ie 23-5 = 18cm, cutting duplicate, each fold to)


1. Shop cotton table cloth with hot together, lining fabric folding ironing
(Left small round pieces of cloth wanted to make a snap, and the results small, have no access to, ignored, and it appears to ignore all of the following)


2. sparse table cloth and cloth sewn together, then cut the edges together, began lining may be slightly larger, better operation


3. Secure the inner woven label, and then basting fixed lining on this side, and trim the edges


4. This is not very clear, meaning that fixed sewn around the edge, seam 0.3cm


5. edging strip a child, the length of the margin on the rich richer da!


6. I have been here a sparse sutures removed, began edging
Table cloth up, fixed position edge of the package, the seam is aligned to 0.7cm, with the main edge of the presser foot edge
Sewing process, always remain aligned position on the side of the package body, and the presser foot and body
There is not the beginning of the seam from the head side of the package, to empty out a piece, more than a seam on it


7. sewing circle, connecting the head and tail, and the two side folding it, forming a figure of 45 °


8. suture interface, hidden stitch can


9. sewn, cut two small angle


10. Fold the wrapping, wrapping the body edges, and Basting circle



11. Internal folded edge to be aligned with the car suture


12. lining up, according to the figure to adjust the presser foot, needle, and distance edging and sewing process remains


13. sparse sutures removed, the car looks good


14. sewn buckle, installed card core, done!


Contrast edging and not edging



Group photo




ไม่มีความคิดเห็น:

แสดงความคิดเห็น