Rose Blossom Bag Tutorial

1. Cut by drawing a table cloth b, c and paste sewn together. (Excluding drawings seam, the seam is required plus)

2. Would reverse the excess fabric cut off, careful not to cut bad table cloth, oh.

3. Would dig up the middle of a table cloth, cutting edge dental mouth, then stick with the table cloth sewn together b.

4. After the stitching is complete, the same will be negative excess fabric cut.

5. Press the patch order to complete the patch sewn drawings.

6. Complete the table cloth patterned after the patch, the table cloth cotton cloth shop three basting pressure line. Cloth table cloth and need than cotton shop around more about 3cm, for edging.

7. After the completion of the pressure line, sew on button and embroidered modeling needs embroidered part.

 8. Behind the same approach, the table cloth cotton cloth shop three basting pressure line.

 

 9. Part of the production side of the package, by drawing a line break on the double, then press the cotton cloth table cloth shop three basting pressure line, mainly left seam Oh!

10. Trim by drawing the sides (leaving around 1cm seam) and then painted on the center, aligned with the center of the front table cloth, and then sewn together, sew from the middle to both sides separately.

 

11 after the sheet bundle using the same method. And the two sides of the longitudinal position of the top of the suture together. 

12. With extra cloth inside edge.

13. Mouth of the package for wrapping, first edging trim front of the pack, do not stay on top seam oh. If you need to install the handle, before edging into the first fixed handle pull ring.

14. Sew zippers, placed handle, complete!